Tank Model: Bruder BB4500 (DOT- 406)

Tank Style: Bucket Box W/ Top Hinged Rear Door & Hinged Side Doors (Barn Doors)

Tank Capacity: Five Compartment 4,500-Gallon – 1500//1200//800//500//500

Double Bulkheads: Four Double Bulkheads and a Bottom Drain

Tank Construction:  Shell Spec: 5454-H32 Brite Alum, 210″ Sides, 249″ Top & .310″ Bottom Baffle/BH Spec: 5454-O Mill Alum., .210″ / Double Bulkheads Head Spec: 58″ X 82″ 5454-O Brite Alum., ,210″ Sill Spec: 3/8″ Alum. Extrusion 9-3/4″ Tall Crossmembers: .249″ Aluminum / Open Style Crossmembers Outriggers: .249″ Alum., W/ Pads

Manholes: (5) 16” Betts Manholes Offset To Roadside With 10” Offset Fill & (2) Vents (5) Tank Markers Will Be Installed – One For Each Compartment W/ Built In Vacuum & Pressure Relief

Bottom Sump: (5) 3″ Sumps W/ Deflectors

Emergency Valves: (5) 3″ Betts 90* Air Operated

Vapor Recovery: Curb Side Overturn Rail W/ 3″ Victaulic Stubs / Vapor Line Down Thru B/Box W/ Line Terminating Out Front Of B/Box Facing Curb Side W/ Flange

Jet Sensor Rod: Jet Sensor Rod Attached To Each Manhole Collar / Capacity Rod W/ (1) Disc Attached To Each Manhole Collar

Static Line/Lug: Static Knobs Attached To Curb Side Overturn Rail / Static Line Attached To Each Manhole Collar & Down To Tank Bottom

Ladders: Both Sides Rear W/ Platform At Top / Grip Strut Platform Between Overturn Rails & Ladder Platforms.

Walkway: Expanded Metal On Top Of Tank & Ladder Platforms 

Fenders: Rear Fenders Will Be Jeep Style Fender For Tri-Axle Chassis     

Piping: Piping Will Be 3” From Air Operated Betts 90 Degree Valves To Front Curbside Dual Air Manifold. Includes A Five-Compartment Air Operator, 3” Air Emergency Valves, With A Front Fire Release Roadside.

(2) 3” Aluminum Pipe Running From Front To Rear Of Tank (Between Tank Sills) With Victaulic Grooved Ends For Suction and Discharge Piping.

Bottom Loading: Betts Air Actuated Dual Manifold Supplied and Installed Curbside. Openable API Bottom Load Adaptors, Without Sight Glasses, Without Product Returns, Without API Guard Bar and Lock. Butterfly Valve With 3” Male Adaptor, Dust Cap, And Sight Glass Installed on Each Bank of Manifold for Gravity Drop and Suction.

Overfill Detection: Scully Intellicheck Bottom Loading and Vapor Recovery System – *Includes Civacon T.I.M. Chip (model CID-1000)

Tank Mounting: Mounting Will Be Done with Bruder Patented Tie Downs.

Tank Equipment:

Tank Lights:    A Betts LED Lighting Package Will Be Installed On The Tank. All Lighting Will Be Wired Into Weatherproof Tubing And Junction Boxes.

All Lighting Conforms To DOTFMVSS-MC108 Regulations. All Lighting Will Be LED. A Large Electrical Box Will Be Installed On The Front Driver’s Side Light Wing With Hose Reel Circuit Breaker, Solenoid, Two Relays And Brake Light Switch

Additional Lighting:  (6) Led Work Lights Mounted 2 Per Side And 2 In The Rear. Wired To Switch(S) In Cab.  13″ LED Work Lamp Installed And Centered Inside Rear Cabinet – Wired To Switch.      

Meters: Road Side (1) 2” LC M7 Class1 Meter w/ LCRIQ Register, Preset, High-Capacity Optic Air Eliminator With Mux Box  Curb Side (1) 2” LC M7 Class1 Meter w/ LCRIQ Register, Preset, High-Capacity Optic Air Eliminator, And Wire Into Guest Supplied Printer.  Calibrated For WI.

Check Valve: Soft Outlet Back Check On Both Meters

Emergency Valves: (5) 3” 90 Degree air with rear control and front and rear fire release

Pumps: (1) Blackmer TXD 2 ½” Pump (Gas Side) With Integral Strainer (1)Blackmer 3” Pump (Diesel Side) w/ Air By-Pass & High/Low Switch In The Rear

PTO: Dual Electric Operated PTO’s and HD PTO Drivelines (Shaft Driven)

Hose Reels: (2) Hannay multi-wrap inverted hose reels: mounted in rear out the side doors

Delivery Hoses: (1)  150’ x 1 3/8” ” Redwing hose with 1-1/2” Scully Style nozzle with swivel.

(1) 100’ x 1 3/8” Redwing hoses with OPW 1-1/2″ 1290 Auto Stop Nozzle with swivel.

Nozzle Holders: Nozzle holders with drains will be supplied on both sides.                        

Cabinet: (2) 72” aluminum side Cabinets with Barn Style (2) Doors, Welded directly to the tank. (Chassis needs to be clean behind the cab)

Hose Tube: (1) 6″ Aluminum Hose Tube w/Door Installed Road Side

Painting/Graphics: To Be Performed by Others

Placards: Install Required DOT decals. (4) 1203 placards installed one on each side and front/ Rear end of unit.  Rototag 8-sided product markers located at rear. 

Camera: Rear View Back Up Camera; 7” LCD Digital Color Monitor, Built In Heater, Night Vision w/ 50 Foot Range with 28 Built In Infra-Red

Tank
New 3,499-Gallon Water Capacity Tank, 80” O.D., DOT Specifications # MC-331, *Internal Pump Discharge Piping, Continuous Welded Vessel Frame Pad w/ 3” Spray Fill Opening and All Materials Necessary for Mounting Equipment to Chassis

Tank Finish
Two Component Epoxy Mastic Primer and Polyurethane Finish – White
Barrel Rails and Tank Belly Painted Black w/ Gravel Guard
Gravel Guard on Lower 1/3 Of Tank.

Bobtail Fittings
MEC Accu-Max Float Gauge
2-2” Rego Pressure Relief Valves
All Necessary Tank Excess Flows and Back Checks
Rear Vapor (1-3/4” Acme) And Liquid Loading Lines (2” Spray Fill Piping W/ 3-1/4” Acme) And Brass Fittings

LP Pump Drive System
Heavy Duty Hot Shift PTO Installed with Heavy Duty PTO Drive Line and Air Operated Controls Mounted in the Rear

LP Pump System
New Corken 3” Flange Mounted Pump Model Z3200 w/ High Flow Flange Elbow
Rego 3” Double Flanged Mounted Internal Valve with Pneumatic Actuator
Welded Style Piping System with *Internal Pump line Piping

Deck and Lighting
Open Style Stainless Steel Deck and Fenders (Mill Finish)
Betts L.E.D. Sealed Skirting Lights, Wiring Kit and Upper Light Module W/ 4 Stop/Tail/Turn Lights.

Meter/Register
New 2” Liquid Controls Meter With LCR-IQ Electronic Register w/ Epson Slip Printer and Stand. Stainless Steel Meter Cabinet With Work Light Inside – Mounted Curbside

Hose Reel and Hose
New Hannay Aluminum 12 Volt rewind hose reel with 1-1/2” full circle swivel, top rewind, solenoid, and circuit breaker, 1” X 150’ Low temperature hose with Rego A7797 quick close hose end valve and 1” swivel. – Mounted Roadside

Rear Bumper
Build And Install DOT Rated Rear Bumper and Supports to Truck Frame with Tow Hooks and SS Cover.

Remote Shut Down
Base Engineering *Pro-Control 3 Remote Functions: Delivery-Readout, Reel Out, Pto-12v, Throttle-12v, E-Stop-Ign, Menu) Includes Pulse Converter All on Handheld Remote to Be Incorporated with The Parking Brake.

DOT Safety Package
20# Fire Extinguisher In All Weather Plastic Enclosure, Wheel Chocks and Emergency Warning Triangle Kit
All DOT Required Decals, Mud Flaps, Reflectors, And ID Marking for Tank Openings

Options Included:
• Frame Mounted Toolbox Smooth Aluminum 48” X 24” X 24” (DS Mount)
• Blow Off-Line In Liquid Fill Piping (Stainless Steel Tubing To Top Of Tank)
• Stadium Lighting: 3 LED Flood Work Lights Mounted on Upper Light Module, and 2 LED Flood Lights Installed on Rear Cab corners: Wired To Switch on Dash
• Marshall Excelsior Nozzle Holder Installed on Open Deck
• Freightliner Rear View Camera Incorporated into Radio Display
• Cab Lighting – 2 LED Flood Work Lights Mounted to Rear Cab Corners
• On-Spot Automatic Tire Chain System
• Aluminum Sun Cover for Hose Reel